Training For Surgical Glove and Balloon Factories

Manufacturer:  We are in the process of reopening a Surgical glove and balloon plant.

We would like to use your services in the following areas:

1)  To explain the process of manufacturing latex surgical gloves and
balloons and to explain the ingredients we will require for this
process.
2)  To find the best price for the latex raw materials and other raw materials from Malaysia.
3)  To be our technical expert who will also train us in the latex production process.
4)  To help us with calculating costs for the production of latex
gloves, balloons and condoms.
5)  To get us the total cost of a surgical glove plant from Malaysia, both new and second hand. 

I would very much need the training.  Could you give me an indication of cost for training on the surgical gloves manufacturing process as well as how long you would require to properly train someone.  What level of education should this person require or do they not need to be very technical.

John Woon (Senior Latex and Rubber Consultant:The fee for the training is USD…..which covers the following:

1.1) Latex properties
1.2) Latex stability
1.3) Latex compounding (preparation of curing chemicals and recipes)
1.4) Dipping technology for medical gloves (including all stages of the dipping process)
1.5) Defective Gloves and remedial solutions
 
Depending on how fast the trainees could absorb, the training duration could be from 2 to 3 days or longer. Follow-up trainings could be included at lower cost.

Preferably, the trainees should have a basic degree or at least some knowledge of A-level chemistry. However I could also tailor my training to suit non-technical people such as accountants and economist as well.

Latex Foam Insoles for Footwear

Manufacturer:  We manufacture latex foams for the bedding industry and insoles for the shoe industry. Our foam insole quality is not as good as we expected. Over the years we have tried to improve the product but haven’t managed yet to do so. Is this an area of your expertise, or is there another consultant you can recommend me?


John Woon (Senior Latex Consultant):  I’ve studied your latex formulation and the samples you sent me. The following are my observations:

1) Competitor’s products have smoother surface compared with yours  i.e. the smoothness when rubbed with fingers.
2) These also have comparatively very small cell structures (pore size) compared to yours. Also, they have more even pore size. This is only visible under microscope or magnifying glass.
3) The competitor’s product also has superior wetting property and breathability compared with as it absorbs water (and hence sweat from the feet) at a very much faster rate. You could confirm this by dropping water drops onto the insole.
4) The superior wetting property and breathability could be the results of deliberate addition of wetting agent (i.e. surfactant) or higher level of foaming agent. When I washed the sample with water, soapy and foamy water was obtained. After drying the washed sample, the wetting property and breathability had markedly reduced.
5) The smoothness mentioned above could be due to both smaller cell structure and the presence of wetting agent/surfactant. This was confirmed by the observation that after washing, the smoothness has reduced.

My recommendation:

1) Increase the level of Terric N20 for your non-gel foam for wetting property.
2) Addition of wetting agent in your gelled foam might affect the gelling. This is therefore best added by spraying onto the foam before the final drying stage.
3) For finer cell structure (pore size) you should adjust your foaming machine to have a longer foaming time during the refining stage at slow speed. Potassium soap of castor oil would give finer pore size and therefore you might want to replace potassium oleate with this in your gel foam recipe.
4) You could also look into the possibility of using silicone-based surfactants either in the recipe or by spraying to achieve the surface smoothness. These surfactants are available from Dow Corning.