JohnWoon(JW)Latex Consultants

JW Latex Consultants (and Rubber Consultants,乳胶顾问) offer solutions to your problems in Natural Rubber latex and Synthetic Rubber latex processing and the manufacturing of latex products (condoms, catheters, medical gloves, baby teats and soothers, toy balloons etc) Quick answers through e-mails are possible at reasonable cost.

You Are Visitor Number: Expedia Promotional Codes

__________________________

This Site Is Best Viewed With Mozilla Firefox Browser. If You Are Viewing With Internet Explorer, It Is Advisable to Switch to Mozilla Firefox By Going to This Link -> http://www.mozilla.org/en-US/firefox/new/
It Is Free to Download
__________________________

Send Your Enquiry and Orders To: woonsungliang@yahoo.com.sg

Problem Solving Through E-Mails with John Woon Latex Consultants Is Possible
可以通过电子邮件与JW乳胶顾问来解决问题

__________________________

Please kindly donate to support the maintenance of this site. We'd appreciate it very much.

__________________________

__________________________________________________________________________

Tuesday, March 09, 2010

PolymerLatex increasing NBR latex prices

Marl, Germany -- PolymerLatex is increasing prices for the NBR latex product range worldwide by 80 USD per tonne wet effective from 1st April 2009. According to the company, the price increase is necessary to offset the continuous rise in raw material costs for Acrylonitrile. Further price increases can not be ruled out, as Butadiene is expected to remain in tight supply world wide.

You are at the site for answers and solutions to all your problems in natural rubber latex processing and manufacturing of industrial, household and medical gloves, condoms, catheters, baby teats and baby pacifiers, toy balloons, latex foam products, latex threads etc.

posted by bloggerking at 4:32 pm

2 Comments:

Unknown said...

Dear Mr. John Woon..I am a student from local university studying the different of NBR and NR latex..I want to ask a question on NBR and NR latex..Is it possible to mix this 2 kind of latex?Is there any possiblity that the mixture will be unstable and form lumps or sedimentation?hope you can answer my question..TQVM

7:22 pm

bloggerking said...

Dear Ismail,

As the rubber particles of Nitrile latex are very much smaller than those of the natural rubber latex, there is a tendency of the Nitrile rubber particles to "rob" away the stabilisers from the Natural rubber particles i.e. desorption of the surfactants from NR latex to Nitrile latex. This would result in the instability of the blend.

You therefore have to pre-stabilise the NR latex well before mixing it with Nitrile latex. Also, pH of Nitrile latex should be adjusted to that of the NR latex before blending.

If you need further help, please send an email to me at woonsungliang@yahoo.com.sg

Regards

John Woon

11:07 pm

Post a Comment

<< Home

TRANSLATE THIS WEBSITE TO OTHER LANGUAGES:

Click to translate

Senior Latex and Rubber Consultant 高级乳胶顾问(John Woon)

Certified as Expert Author by EzineArticles.com
_____________________________________

A Rubber and Latex Technologist, John Woon began his professional education in Polymer Science and Technology (Plastics and Rubber Technology) in 1968. He continued his study and training in England and worked for International Synthetic Rubber Company Ltd (Eni), UK in 1970's.
He joined the world's biggest producer of Prevulcanised Natural Rubber Latex and specialty latex compounds, Revertex Malaysia (Now a key member of the global Synthomer family) in 1981 and was actively involved in the marketing of a wide range of synthetic resins, polymers (for the coating and adhesive industries) and world renowned specialty natural rubber latex and compounds. He headed the Technical Department of the Natural Rubber Division of Revertex Malaysia until 2004.
Now a Latex and Rubber Consultant with satisfied clients across the globe, he is a member of Plastics and Rubber Institute, Malaysia, ABE(UK), ICM(UK) and had also been a member in ASTM (International) Committee D11.
He welcomes all enquiries however big or small they might be.
For more details of John Woon's services, please visit our sister websites at http://woonsungliang.wix.com/jw-latex-consultants and https://slwoon2.wixsite.com/johnwoon
For testimonials from John Woon's students, customers and clients, please go to the following links:
http://woonsungliang.wix.com/jw-latex-consultants#!clients/c1tsl

https://slwoon2.wixsite.com/johnwoon/projects

Please be informed that our sister website, JWLatexConsultants.com has been hacked and infected. Please do not visit this site for the time being. We apologize for any inconvenience caused.

John Woon with wife and daughter in West Lake or Xī Hú in Hangzhou, China - a UNESCO World Heritage Site

_____________________________________
CLICK HERE for RUBBER and LATEX PRICES
_____________________________________

_____________________________________

Web latexconsultants.blogspot.com

_____________________________________

NEW! NEW! NEW!

New second edition of "Practical Latex Technology - With Answers to More Than 150 Questions"

Get Your Copy Now!

JW Latex Consultants are pleased to announce the launching of our second edition of the 159-paged Ebook, "Practical Latex Technology".
It contains answers to more than 150 questions plus other very useful tips and ideas!

For easy of reference, it is
divided into 5 Parts:

Part 1: Vulcanisation
(Vulcanization), Vulcanisation of Latex and Prevulcanised Latex

Part 2: Properties of Rubber
and Latex

Part 3: Problems of Latex
Processing and Finished Products

Part 4: Compounding Ingredients
and Processing Aids

Part 5: Miscellaneous Subjects
Get your copy for a one-time investment of only $85.00!

Practical Latex Technology - 2nd Edition

NOTE: If you do not receive the book online immediately after making your payment, please contact John Woon at woonsungliang@yahoo.com.sg and john@jwlatexconsultants.com and he would ensure that the book is sent to you without undue delay. _____________________________________

CISSP Training for IT Security Professionals

Sophisticated security software, regular security assessments and stringent security policies alone cannot ensure good information security standards in an organisation. It requires the personnel to be well trained, updated and knowledgeable about information security aspects. Professional trainings and certifications play a significant part in the continuous development of IT professionals.
The 2015 (ISC)2 Global Information Security Workforce Study clearly shows that the information security workforce shortfall is widening. In the 2015 survey, 62% of the survey respondents stated that their organizations have too few information security professionals compared to 56% in the 2013 survey.
To fill the workforce void in Information Security, having the right certification matters. There are a variety of certifications to choose from in the field of Information Security, so which one is the best fit for you?

For more information, visit us at http://www.akati.com/ _____________________________________

The Secrets

Know all the secrets of how you could attract all the things you dream of into your life such as wealth, health, love and happiness via The Universal Law of Attraction
Check Out The Following Links Now:
http://secrets2me.blogspot.com/ _____________________________________

Family Health Guide

A Must-Have Family Health Care Guide: All you need to know about Health, Wellness, Health Care Products, Nutrition Supplements, Natural Health Care Products, Alternative Health Care Products, Preventive Health Care Products to stay fit to deal with the daily stresses of life and have good physical and mental health for a long and healthy life. Your health and wellness is under your control, if you choose for it to be. Enjoy our Free Family Health Guide!

Check Out The Following Links Now:
http://healthguide2u.blogspot.my/ _____________________________________

From ISO 9001:2008 certified company that produces with well-sorted used tires focusing only on the finest productions of clean powders made out of prime 100% truck tires as well as a blend of 80% truck and 20% passenger tires.

100% Truck tire powders and 80% Truck tire / 20% Passenger tire powders have a typical sieve analysis of <15% of 20 Mesh and >80% of 42 Mesh in compliance with ASTM D5644.

For more details, please contact JW Latex Consultants at woonsungliang@yahoo.com.sg and john@jwlatexconsultants.com
_____________________________________
_____________________________________

_____________________________________

Dunlop Adhesive, Tack-On Reusable Adhesive, Designer's Gum etc.
Contact Adhesives are most suitable for general bonding applications for furniture, decoration, construction and light industries. Dunlop CA Adhesive is ideal for bonding Formica, Rubber, Cork, Leather, Fibreglass, Polyurethane Foam, PVC Sheet, Carpet, Leathercloth, Leather, Cork and EVA to wood, Painted or Unpainted Metal or concrete.

For more details, price quotation or samples, please contact: woonsungliang@yahoo.com.sg

_____________________________________

You Are Also Welcome To Visit Our Sister Websites At The Following Links
http://woonsungliang.wix.com/jw-latex-consultants
https://slwoon2.wixsite.com/johnwoon

_____________________________________

Please kindly donate to support the maintenance of this site. We'd appreciate it very much.

_____________________________________

Subscribe in a reader

_____________________________________

_____________________________________

Useful Links:
https://slwoon2.wixsite.com/johnwoon/important-links>
_____________________________________

John Woon with His Associates, Clients, Customers, Students and Friends:

_____________________________________

John Woon conducting training sessions on "Latex Technology", "Latex Dipping Technology", "Latex Dipping Process Controls", "Glove Defects and Remedial Actions", "Vulcanization" and "Mixing Tank Design" for Hartalega in their NGC (Next Generation Integrated Glove Manufacturing Complex) in Sepang.
_____________________________________

John Woon with Professor Dr. Mohd Rafie Johan and his team of scientists at Nanotechnology and Catalysis Research Centre of University of Malaya.
_____________________________________
John Woon with the late Tan Sri Dr B.C. Sekhar
_____________________________________

John Woon with Professor Emeritus Tan Sri Datuk Dr. Augustin Ong
_____________________________________

John Woon with Dr. Tan Ah Seng (Consultant - seated right), Professor Gan Seng Neon of University of Malaya -Standing left) and Kuan Eu Jin (Technical Director of Hartalega)
_____________________________________

John Woon with his trainees after conducting training on "NR and Nitrile Latex Dipping Technology" for one of the world's largest medical glove manufacturers in November 2014.
_____________________________________

John Woon with his trainees after conducting training on "Latex Foam Technology" for Goodnite Sdn. Bhd.
_____________________________________

John Woon with Professor Emeritus Dr. Augustin Ong and Research students, Ms Dong and Ms Leong at Malaysia University of Science and Technology
_____________________________________

John Woon in the renowned Ashridge Business College, England
_____________________________________

John Woon with latex toy balloon manufacturer from Colombia, Oswald Loewy

_____________________________________

John Woon with Dr. Phil Nelson from UniQuest, The University of Queensland, Australia

_____________________________________

John Woon with clients from Top Gloves Latex Industries, ALGERIA (No relationship with Top Glove Sdn. Bhd. Malaysia)
_____________________________________

John Woon with General Manager/Director, senior managers, executives and technologists of Ansell after conducting problem solving session.
_____________________________________
John Woon's training sessions with Hartalega Sdn. Bhd.
_____________________________________
John Woon's training session on condom manufacturing with Medical Latex Sdn. Bhd.
_____________________________________
John Woon with Synthomer
_____________________________________
John Woon with client, Adventa Berhad
_____________________________________

John Woon conducting brainstorming session with catheter manufacturer, Bard Sdn. Bhd.
_____________________________________
John Woon with 4D Rubber , UK (Rubber Sheeting Manufacturer)
_____________________________________
John Woon with Playtex , USA
_____________________________________
John Woon with Swan S.A. , Greece
_____________________________________
John Woon with ACTEGA Artística , Spain
_____________________________________
John Woon with Argos in Santiago, Chile (Manufacturer of Latex Toy Balloons, Swimming Caps, Household Gloves and Medical Gloves)
_____________________________________

John Woon with Raschig GmbH , Germany
_____________________________________

John Woon in Kyoto, Japan (Latex Toy Balloons Manufacturer)
_____________________________________

John Woon in Tokyo, Japan (Latex Toys Manufacturer)
_____________________________________

John Woon in Egypt (Latex Products Manufacturers)
_____________________________________
John Woon in Taiwan (Glove Manufacturer)
_____________________________________
John Woon in Krakow, Poland (Latex Dipped Products - Baby Teats/Soothers, Household Gloves)
_____________________________________
John Woon delivering a paper in a Latex Seminar in Jakarta, Indonesia
_____________________________________
John Woon conducting a training session in Bangkok, Thailand
_____________________________________

John Woon delivering a talk in an International Symposium, Kuala Lumpur, Malaysia
_____________________________________
John Woon in India (Latex Foam Products Manufacturer)
_____________________________________

John Woon with Nolato , Sweden
_____________________________________

John Woon in Philadelphia, USA (Household Gloves Manufacturer)
_____________________________________

John Woon in Akron, USA (International Latex Conference)
_____________________________________

John Woon in Shanghai, China (Condoms Manufacturer)
_____________________________________
John Woon with his team of cheerful chemists, technologists and technicians - Before his retirement from Revertex Malaysia Sdn. Bhd.
_____________________________________
For images of some of the defective products sumitted by clients and customers, please check out the video below:

_____________________________________

Blog Directory

THE FOLLOWING ITEMS ARE AVAILABLE:

1) Latex Dipping Machines:

2) Equipment and Services for Testing and Packaging of Condoms and Gloves:

* Testing Equipment for Condoms and Gloves

* Packaging machines for Condoms

* Laboratory and Plant Design

* Testing Software and Training

3) Third Party Testing Services According to National and International Standards

4) Latex Dipped Products

5) Latex Foam Products

6) Latex Thread Machines

7) Chemical Milling Machines: Vertical Mill, Horizontal Mill, Basket Mill

_____________________________________

John Woon(Senior Latex Consultant)in Trouble Shooting and Brain Storming sessions in Poland and Greece

CLICK THE FOLLOWING LINKS TO READ PREVIOUS POSTS:
(There are more articles in the Archive: below)

Water Resistance of Rubber Products

Back after 3 years, the K Show Infuses Optimism in...

How Condoms are Made

PolymerLatex Malaysia Plant Is Up and Running

Rubber Glove Prices May Rise This Year

International Conference on Rubber Compounding

Rubber prices may climb to 30-year high

What should be your cure temperature and time for ...

Factors affecting the quality of natural rubber latex

Pink Glove Dance for Breast Cancer Awareness

John Woon With Clients from Denmark, Sweden, China and Iran

YOUR CALCULATOR

Influence of Degree of Crosslinking on Rubber Properties

PROPERTY CHANGE WITH INCREASE IN CROSSLINKING

Modulus, Hardness Increase
Elongation at Break Decrease
Resilience Increase
Heat Built-Up Decrease
Solvent Swelling Decrease
Creep, Stress Releasing, Set Decrease
Abrasion Resistance Increase
Fatigue Cracking Increase
Low-Temperature Crystallisation Decrease
Tensile Strength, Tear Strength Increase first, then Decrease

If in doubt of the terms used by John Woon in this Site, please refer to the following Dictionary

Online Reference

Dictionary, Encyclopedia & more

Word:

Look in: Dictionary & thesaurus
Computing Dictionary
Medical Dictionary
Legal Dictionary
Financial Dictionary
Acronyms
Idioms
Wikipedia Encyclopedia
Columbia Encyclopedia
Periodicals
Literature
by:

__________________________

Send Your Enquiry and Orders
Email: woonsungliang@yahoo.com.sg

Problem Solving Through E-Mails with John Woon Latex Consultants Is Possible
Email your enquiry at woonsungliang@yahoo.com.sg

__________________________

CLICK HERE to see Some of the Problematic Latex Products Submitted To John Woon Latex Consultants
__________________________
John Woon with Clients from Thailand and Malaysia

__________________________

Click HERE to view MORE videos and articles about MEDICAL GLOVES

__________________________

Link to this Site

If you like what you are seeing here, please feel free to link to this site by copying and pasting the following HTML code into your own blog or web template. <a href=" http://latexconsultants.blogspot.com/"target="_blank" title=" JohnWoon (JW) Latex Consultants "><img border="0" alt=" JohnWoon (JW) Latex Consultants " width="80" src="http://i154.photobucket.com/albums/s255/ownlblog/tipsbanner80x15.gif" height="15"/></a>

__________________________

USEFUL LINKS

1) Malaysian Rubber Board

- Some Interesting Articles From MRB
- Daily Rubber Prices
- Crude Oil Prices

2) Malaysian Rubber Export and Promotion Council

3) Standard Malaysian Glove (SMG)

4) Flexsys - Manufacturer and Supplier of Rubber Chemicals

5) Robinson Bros. - Manufacturer and Supplier of Rubber Chemicals

6) Vanderbilt - Manufacturer and Supplier of Rubber Chemicals

7) Air Products – Surfactants Manufacturer and Supplier

8) Ciba Specialty Chemicals - Surfactants Manufacturer and Supplier

9) Lanxess(Bayer) - Manufacturer and Supplier of Rubber Chemicals

10) Revertex Malaysia – Natural Latex Compounds Manufacturer and Supplier.

11) Synthomer – Synthetic Latex Manufacturer and Supplier

12) Titi Latex – Natural Rubber latex Concentrate Producer and Supplier

13) How Did Latex Allergy Come About?

14) NIOSH (National Institute for Occupation Safety and Health, USA)

15) Market Research Reports on Medical Gloves

16) FDA Medical Glove Powder Report

18) US FDA on Protein Allergy Issues

19) Glove Selection Guide

20) FDA’s Tightened AQL for Medical Gloves

21) One-Stop Latex Glove Education

22) Chemical Suppliers from Malaysia

__________________________

John Woon (Senior Latex Consultant) in Europe (Spain, France and Poland)

John Woon (Senior Latex Consultant) with World Renowned Manufacturers of Condoms, Latex/Synthetic Gloves and Catheters and Producers of Natural Rubber Latex Compounds and Nitrile Latex.

Please submit your questions and comments by filling up the following form. Q&A would only be published with your permission.
(Details such as processing parameters and fomulations would not be revealed for obvious reason)
Name:
Email:

__________________________
Global Trade Leads - Trade portal and business resource guide. Providing free international trade information as well as a huge database with buyers and sellers!

Some Of The Testimonials Received by John Woon Latex Consultants: __________________________ ------------------------------------------------------------------------------------------------------------------------------------ ---------------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------------- 1) My name is Ugan Padayachee, a South African Mechanical Engineering student (Durban University of Technology) I am deeply indebted to Mr. Woon for the personal assistance he provided me during my latex research. I have no experience with chemistry and was assigned the task of developing a latex bag as part of my training. I asked many students and lecturers for assistance but no one was prepared to sacrifice their personal time. The internet was basically my only source of information. It took me months to create a product which resembled a bag, which was far from complete. I was on the verge of giving up when I stumbled across Mr. Woon's website which I immediately emailed. I firmly believe that Mr. Woon is an invaluable mentor. It is rare finding professional people such as Mr Woon who offers expert services to students and others. Mr. Woon made it his honourable duty and an effort to reply to all of my emails as promptly as possible, and provided me with a detailed professional analysis. This obviously resulted in an immediate success in my project. I greatly appreciate the time and valuable advice that he offered me. Although I did not personally meet Mr. Woon, I strongly believe that he is a man driven by passion and love for helping others. His expertise in his field of Latex Technology is highly recommended to anyone seeking advice.

2) We are medical glove manufacturer. It gives me great pleasure to write this testimonial to express our utmost and sincere thanks to Mr. John Woon for guiding us towards achieving the present very high production yield and away from the nightmares we used to have. His simple step-by-step approach in explaining our problems and recommending the various steps we need to carry out is so easy to follow especially by our factory workers. Our only regret was that we did not "discover" him earlier than our competitors! We wish him all the best and hope that he’d continue to help us whenever we need him.

3) We have been making toy balloons of all types for many years. Our recent encounter with Mr.Woon was very fortunate for us. Our productivity has now improved and customer complaints have reduced. We’re very grateful to this very experienced latex technologist and would recommend his service to anyone without hesitation.

4) Great job, Mr. Woon and many thanks to you for your very valuable information and advice. You’re most welcome to our factory anytime.

5) First of all let me say this, John: My supervisors hope that you could be with them everyday! You’ve solved their many problems and the best thing about this was the way you explained to them in very simple layman language that they could easily understand!
6) Pardon my English. I only speak and write Spanish with only very little English but I could understand you well. Mucho gracious amigo for all the help! If you want in Spanish, I write more.

7) Your advice on the right choice of accelerators has overcome our persistent blooming problem and also problem of detergent resistance of our household gloves which we had for a long time. When can you visit us? We want to have you as our guest.

8) We have been attacked by over cured latex compounds on many occasions. Our balloons and glove suffered high loses because of tearing. Mr. Woon came to our rescue through a friend. Our fees to him could not reflect our gratitude. We hope we could meet him one day!

9) John, I have such faith in your system. Anyone can take a full 8 weeks to check your report on recommended remedial actions. Put it to work in his factory that produce any latex dipped products. If he cannot solve at least some of their daily problems using your strategies and techniques, he should come to me and I’d show him what I’ve learnt from you! In the incredibly unlikely event that he still doesn’t make any headway, I’d volunteer to pay him the money that he has invested in your report!
10)John was extremely helpful in explaining the chemistry and processes involved in latex reactions. His knowledge and expertise helped a great deal in a specific problem which we were trying to overcome. Not only did John explain the reactions that could be occuring, he also suggested possible products to include into a formulation which would aid the performance of the final product.------------------------------------------------------------------------------------------------------------------------------------
11)We are manufacturer in medical device industry. We would like to take this opportunity to express our heartfelt thanks to John for all his advices and help in resolving our latex problem. John is extremely helpful in answering our questions and sharing with us his invaluable knowledge on latex dipping. We are in debt to his help and would recommend his services to any manufacturer who are facing problem in manufacturing latex or rubber products.
12) We located John Woon’s website while searching for an answer to our coagulant mixing problem. Within a matter of hours we had the answer we had been searching for weeks to find. Not only that, but he helped locate the supplier of what we needed. Fast, efficient expert advice, what more can you asks for.
13)I’m very pleased to write this brief testimony after John Woon had successfully guided us in our rubber compound formualtion for an application that requires very high heat resistance and low tension set. We were amazed by his very easy to follow instruction written in simple English so that our supervisors amd factory floor workers could understand. We were also very pleased to receive him as our guest in our factory.
14) Just a brief note to say “Thank You” for solving our problems in rubber products manufacturing not to mention the money we’ve saved!
15)I know Mr. John Woon through internet many years ago.I have been linked to the manufacturing of latex gloves more than forty years ago, and Mr. Woon has helped me to clear some doubts about raw materials, processes and manufacturing of these products. His blog has been a great help for me to be actualized in the world of latex. Besides, he has done a great contribution with his knowledge about the industry….. Alexander Byfield
16)We recently started manufacturing and trading Latex . We had couple of issues and had been looking for possible solution. Thankfully, found Mr. Woon’s website, when the query was sent to him I must say he was very kind enough to solve the problem and I am very impressed for his quick response. Mr.Woon you are doing a great job and I really appreciate your effort. Keep up the great work, I wish you more and more success in your career…… Syed Khader, Tuff Bond
17)John has helped us to develop natural rubber sheeting with a complex compounding issue. He never hesitates to give us additional details to help us with it’s first report. Apart from his high level skills, he is personally very kind and interesting…..Max Craipeau, CEO of Maxco Group, France
18)I am a artisan in Mexico, I was in need of technical guidance because I started to work with natural latex without having prior experience. Mr. Woon has given specific knowledge for what I wanted to do and started me in the right direction into the vast world of rubber. He is very experienced, answered my questions very clearly and probably will answer many more in the future…… GERONIMO DE LA LAMA, Mexico
19)It is rare finding professional people such as Mr. Woon who offers expert services. Mr. Woon took the trouble to reply all my emails and questions in a timely manner. I greatly appreciate the time and valuable advice that he offered me. His expertise in his field of Latex Technology in particular, and rubber Technology in general is highly recommended to anyone seeking advice. Great job, Mr. Woon and many thanks to you for your very valuable information and advice…… Chouaibou Nsangou, Grenoble-France.
20)Mr John Woon is one of those guys who deserves the prestige and fame among the scientific community. He’s very technical and his advices helped me to improve lots of points on my latex artifacts. His consultancy were very helpful and very professional. I would not hesitate to look for his services in the future if i needed. Thanks for helping and congratulations for sharing your knowledge………. F. Rafael, Brazil
21)Mr John Woon is one of those guys who deserves the prestige and fame among the scientific community. He’s very technical and his advices helped me to improve lots of points on my latex artifacts. His consultancy were very helpful and very professional. I would not hesitate to look for his services in the future if i needed. Thanks for helping and congratulations for sharing your knowledge………. F. Rafael, Brazil
22)It is an honor for me to be able to give a testimony about the person who has helped us to solve so many problems that we considered to be critical in the production of both balloons and gloves. Especially the methodology that he follows, since part of sending a very complete technical report which include: a theoretical part, récipes, procedures of process, raw materials and even suppliers and the most importantly staying in contact during its implementation. That is why I consider that John Woon is a great consultant and we will continue to work with him. Ing. Fernando Pérez from Globos Payaso,México. ---------------------------------------------------------------------------------------------------------------------------------------

__________________________
What has the bouncing ball to do with tyres?
Latex Gloves Educational Articles from the Malaysian Rubber Export Promotion Council
How do you select your medical gloves?
Rubber Chemicals: Carcinogenicity, Mutagenicity, Clastogenicity.
Why is Compression Set measurement important?
Assessment of Latex Stability
Joule Effect
Poor Flocking Quality Of Household Gloves
Creaming of Latex
What is Vulcanization?
History of Latex Dipped Products
Applications of Prevulcanized Latex
Defoamer Creating Havoc in Glove Factory
Problems With Milling Rubber Chemicals
Medical Gloves From Guayule Latex

Introduction to SMG Gloves